Fujitsu SPARC Enterprise M4000 Product Notes page 33

XCP Issues Fixed in Releases Earlier Than XCP 1091 (Continued)
TABLE 6
ID Description
RTIF1- When you display the Logical tree on the
070823-002 XSCF Web, there may be multiple displays of
the same domain, depending on the domain
configuration.
RTIF1- When you display the Logical tree on the
070823-003 XSCF Web, the hardware configuration of CPU
or memory which assigned to the domain
appears differently from the actual domain
configuration.
RTIF1- When remote power control mode of
070824-001 interlocking mechanism for power supply to
domain, is enabled, after XSCF Unit is
replaced, the interlocking for power supply by
RCI cannot work.
RTIF1- On the XSCF Web, when you select Domain
070824-002 Mode Configuration to perform various
settings, the pop-up screen may not appear but
"Undefined" may be displayed on the screen.
RTIF1- On the XSCF Web, while the XCP import is in
070824-003 process from the Firmware Update screen,
when you execute the REFRESH button, the
pop-up of "Uploading Now!" disappears and
the XCP import terminates abnormally.
RTIF1- On the XSCF Web, on the Domain Status
070824-004 screen, when you select an XSB displayed on
the Domain Component List, and in case the
selected XSB is not yet mounted or is Uni-XSB,
the pop-up screen displays no data.
RTIF1- On the XSCF Web, when you changed the
070824-005 Refresh Interval value of the Monitor Message
Frame, the invalid pop-up "Confirmation
Domain mode" may appear.
RTIF1- On the tab browser, to the same host, when
070824-006 you perform multiple log-in with the user
accounts of different user privileges, the user
privilege of the last log-in user account will be
applied to those pages which you've already
logged in.
RTIF1- When you change configuration on the XSCF
070824-007 Web, if you select cancel on the confirmation
dialog or perform forced close, the original
configuration page may be unavailable.
Workaround
On the Menu, select System Board
Configuration and refer to the domain
configuration from XSB Status (All). Or use the
showboards(8) command to refer to the
domain configuration.
On the Menu, select Device Status to refer to
the domain hardware configuration. Or use the
showdevices(8) command to refer to the
domain hardware configuration.
After XSCF Unit is replaced, configures the
RCI again and sets the remote power control
mode.
Select Domain Mode Configuration one more
time and perform the settings. Or once
terminate the XSCF Web and then perform the
settings.
None available at this time.
None available at this time.
Ignore the pop-up and close the screen.
When you use the tab browser, do not perform
multiple log-in to the same host.
From the Menu, select the original
configuration page again.
Information About Software 23