Wired Remote Controller - Samsung MWR-WH02 User Manual

Wired remote controller

The wired remote controller is installed on the wall.
Temperature
display
ON/OFF timer/
Error Status display
Operation mode
display
Fan speed/
Air swing display
Special function
display
Note
4
E-
MWR-WH02_IB_E_33323-1.indd 4
Operation ON/OFF button
DIP switch setting is recognized during the initialization. If any changes are

mode to the DIP switch setting after the initialization, you have to initialize
the system by pressing
Press the button after cleaning the air filter.

The remote controller will display the filter sign to alert the user to clean the
filter and turn off the display when the
will be displayed if you press the button of the function that the

indoor unit does not support.
If the indoor unit does not support Set temperature display,

Set temperature is not displayed on remote controller.
Temperature setting
button
Fan speed setting
button
and or reset the power.
button are pressed.
ON/OFF time setup
Mode selection
Swing button
Room temperature
check button
Filter Reset button
sign will be off.
2011-01-10 오후 1:13:28