Selecting The Dry Mode - Samsung MWR-WH02 User Manual

Air conditioner wired remote control
Hide thumbs Also See for MWR-WH02:
Table of Contents

Advertisement

Selecting the Dry Mode

8
E-
MWR-WH02_IB_E_33323-1.indd 8
Select the dry mode if the room is too humid.
Using this mode will slightly lower the room temperature.
Press the
(ON/OFF) button to turn on the indoor unit.
1
- Do not press the
controller is on.
The air conditioner will be turned on with the
Result:
most recently used mode.
The air conditioner has a built-in protection
mechanism to prevent the unit from being damaged
when it is started immediately after being:
 Plugged in
 Stopped
The air conditioner will start up after 3 minutes.
To select the DRY mode, press the
2
displayed on the remote controller.
 The air conditioner will operate in dry mode.
Result:
 The Auto fan speed will be selected
automatically in the dry mode.
You cannot control the fan speed.
To adjust the temperature, press the
3
The temperature can be set between 18°C(65°F) and
30°C(86°F).
The temperature will be adjusted by 1°C(1°F)
Result:
when the
To adjust the air swing direction, refer to page 13.
4
Note
If the indoor unit does not support Dry mode,
Dry is not displayed on remote controller.
(ON/OFF) button if the remote
button until Dry is
buttons.
buttons are pressed.
2011-01-10 오후 1:13:34

Advertisement

Table of Contents
loading

Table of Contents