Locking the Part of the Wired remote controller
To prevent the wired remote controller from children and
changing settings unwillingly, you can lock some functions of
wired remote controller.
Press the
1
mode.
The wired remote controller will enter the setup
Result:
mode and the menu will
display .
2
Press the
Result:
Each time the
Press the
Note
Press the
Using the
3
value of the
Lock setting value
Result:
Press the
4
Press the
Changed settings will be applied.
Result:
Note
Press the
Press the
5
Menu selection display will end.
Result:
Note
If the centralized control is set, you cannot use the
part lock function.
You cannot use the part lock function when Lock all
is set.
Part Lock function can be applied to
, and
MWR-WH02_IB_E_33323-1.indd 19
button for 3 seconds to enter the setup
buttons and select menu .
buttons are pressed,
menu number increases by 1.
button to enter the lock setup
mode.
button to cancel the setting.
buttons, you can set the lock setting
,
,
,
buttons.
- 0: Cancel lock
- 1: Set lock
button after setting.
button to complete the part lock settings.
will be displayed when the lock function is
set.
button to cancel the setting.
button.
buttons only.
On/off
button
Temperature
setting button
,
,
Fan speed button
Mode button
19
E-
2011-01-10 오후 1:13:50