Table of Contents
Advertisement
Creating Conferences (continued)
Call Information
!
Templates Determine Outputs!
The template specified in the
Recording Alias
determines the outputs for each recorded
conference. The call can have a live streamed
component or be for on demand viewing only,
that is, have non-live outputs.
Please note that all calls are recorded by default.
It is the templates attached to the Recording
Aliases that determine which calls have live and/
or on demand streaming options.
Check the Template Output Description for the
selected Recording Alias for a description of the
conference outputs.
Table of
Introduction
Installation
Contents
D13898.08
MAY 2009
The Call Information Settings
TCS
Backing up and
Quick Setup
Administration
Restoring
Administrator
Conference
Settings
Setup
Conferences
94
TANDBERG
ADMINISTRATOR GUIDE
Recording Alias.
Choose a
Alias
from the drop down list. A maximum
of five calls can be active at any one time
and two of these can be streamed live.
Template Output Description.
the Viewer outputs, Live and On Demand
with the layout, format and size.
Also displays the Downloads for portable
devices and for playback on the User's
computer.
Note:
This gives the Owners the ability
to check that they have the correct
Recording Alias
selected for the call.
Dial Number.
Enter the number of the
endpoint you are calling. The address
can be in the format of an IP address,
H.323 ID or E.164 alias.
H.323 ID and E.164 alias dialing
requires a gatekeeper.
Call Settings.
By default the
is set to 768 and Call type is set to
H.323. The bandwidth can be changed
with available options from the Call
Configuration used with the Recording
Alias.
The
Call Type
can be H.323 or SIP if the
Content Server is registered to a SIP
registrar.
View
Appendices
CONTENT SERVER
Recording
Displays
Bandwidth
Advertisement
Table of Contents
