Step 2 - Call Recording Test - TANDBERG Content Server Administrator's Manual

Basic H.323 Services Setup
About Basic H.323 Services
A quick basic setup of your TANDBERG Content
Server includes:
1. Setting up H.323 services via the Content
Server interface (described on the previous
page).
2. Making a test call recording.
3. Changing the administrator password and
setting up server date and time on the
Windows Server (described on the next
page).
If the Content Server is not registered
to a gatekeeper, you can make a test
recording by dialing the IP address of the
Content Server from an endpoint.
To read more on Recording Aliases,
see Recording Aliases
Table of
Introduction Installation
Contents
D13898.08
MAY 2009

If you have logged out, log back in to the
Content Server web interface via HTTP or
HTTPS://<ContentServerIPaddress>.

If the recording alias you have selected
has a live stream output, you can watch
the streaming call in Live Conferences.
Calls made with aliases which have
no live streaming outputs will not be
available for viewing until the call has
finished and the recording has been
transcoded.
TCS Backing up and
Quick Setup
Administration Restoring

Step 2 - Call Recording Test


Go to Conference Setup > Create
Conference .

You can end the call from the Edit
Live Conferences, or from the endpoint
you dialed.
Administrator Conference
Settings Setup Conferences
20
TANDBERG
ADMINISTRATOR GUIDE

Select a default recording alias, type the
address of the endpoint you want to call
and click Place Call. Alternatively, you can
dial one of the recording aliases' E.164
alias or H.323 ID from your endpoint.

link in You can watch the on demand conference
in Recorded Conferences. Calls which
were made with the default
alias need to be transcoded before they
can be watched. The progress of the
transcoding process can be viewed on
the Pending Conferences
View
Appendices
CONTENT SERVER
On Demand
page.