Table of Contents
Advertisement
Site Settings
Current Status.
Displays the status of Content
Server registration with the gatekeeper (registered
or not registered).
Gatekeeper Enabled.
Choose
Enabled
to
register with the gatekeeper.
E.164 Alias.
Other systems can call the
Content Server using the E.164 Alias, if the
Content Server is registered to the gatekeeper.
The recording alias specified in the
Default
Recording Aliases
will be used for the call.
H.323 ID.
Other systems can call the Content
Server using the H.323 ID, if the Content
Server is registered to the gatekeeper. The
recording alias specified in the
Default
Recording Aliases
will be used for the call.
Gatekeeper
Address. This gatekeeper IP-address
will be used to register the Content Server.
Registration. Choose to register the Content Server
as a
Terminal
or as a Gateway.
H.323 Gateway
Prefix. Alias prefix if registered
as a gateway.
E.164 Gateway
Prefix. Alias prefix if registered
as a gateway.
Table of
Introduction
Installation
Contents
D13898.08
MAY 2009
Gatekeeper Settings
TCS
Backing up and
Quick Setup
Administration
Restoring
Administrator
Conference
Settings
Setup
Conferences
40
TANDBERG
ADMINISTRATOR GUIDE
Changes to any fields in the
Settings
section will not take effect on
a given Content Server until all its calls
have ended.
Gatekeeper Discovery
Gatekeeper discovery is
always set to manual on the Content Server. Manual
gatekeeper discovery means that you will register
with one specific gatekeeper, identified by its IP
Address.
Authentication.
By default, authentication
is set to Off. If the gatekeeper requires that
systems must authenticate with it before they
are allowed to register, then change to Auto
and supply the User name and Password that
will be used by the Content Server.
User name.
Enter the user name to
authenticate toward the gatekeeper.
Password.
Enter the password to authenticate
toward the gatekeeper.
Password confirm.
Re-enter the password.
View
Appendices
CONTENT SERVER
Gatekeeper
Advertisement
Table of Contents
