Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Figure 3-6
Note: The configuration wizard only appears when the FVG318 is in its factory
default state. After you configure the FVG318, it will not appear again. You
can always connect to the router configuration menu to change its settings. To
do so, open a browser and go to http://www.routerlogin.net. Then, when
prompted, enter admin as the user name and password for the password both
in lower case letters.
Troubleshooting Tips
Here are some tips for correcting simple problems you may have.
Be sure to restart your network in the correct sequence.
Always follow this sequence: 1) Unplug and turn off the modem, FVG318, and computer; 2) plug
in and turn on the modem, wait two minutes; 3) plug in the FVG318 and wait 30 seconds; 4) turn
on the computer.
3-6
Connecting the Firewall to the Internet
v1.0, October 2005