NETGEAR ProSafe FVG318 Reference Manual page 54

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
2. Click Wireless Settings in the main menu of the FVG318.
Figure 4-8
3. Select WPA and WPA2 with Radius on the pulldown menu. The WPA and WPA2 with
Radius menu will open.
Encryption: There is no choice for encryption; this is displayed for your information. For
WPA and WPA2 with Radius, WPA clients must use TKIP, and WPA2 clients must use AES.
4. Enter the Radius settings.
• Primary Server Name/IP Address: This field is required. Enter the name or IP address
of the primary Radius Server on your LAN.
• Secondary Radius Server Name/IP Address: This field is optional. If you have a
Secondary Radius Server on your LAN, enter its name or IP address here.
• Radius Port: Enter the port number used for connecting to the Radius Server.
• Shared Key: Enter the desired value for the Shared Key. This must match the value used
on the Radius server.
4-16
v1.0, October 2005
Wireless Configuration