Connecting The Firewall To The Internet - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Table 3-1. Ways to access the firewall
Firewall State Access Options
Factory Default Automatic Access via
the Smart Wizard
Note: The wireless Configuration
VPN firewall is Assistant
supplied in the
factory default state.
Also, the factory
default state is
Manually enter a URL
restored when you
to bypass the Smart
use the factory reset
Wizard Configuration
button. See
Assistant
"Backing Up the
Configuration" on
page 8-7 for more
information on this
feature.
Configuration Enter the standard
Settings Have Been URL to access the
Applied wireless VPN firewall
Enter the IP address
of the wireless VPN
firewall
3-8
Description
Any time a browser is opened on any computer connected to
the wireless VPN firewall, the wireless VPN firewall will
automatically connect to that browser and display the
Configuration Assistant welcome page.
There is no need to enter the wireless VPN firewall URL in
the browser, or provide the login user name and password.
You can bypass the Smart Wizard Configuration Assistant
feature by typing
http://www.routerlogin.net/basicsetting.htm
in the browser address bar and pressing Enter. You will not
be prompted for a user name or password.
This will enable you to manually configure the wireless VPN
firewall even when it is in the factory default state. When
manually configuring the firewall, you must complete the
configuration by clicking Apply when you finish entering your
settings. If you do not do so, a browser on any PC connected
to the firewall will automatically display the firewall's
Configuration Assistant welcome page rather than the
browser's home page.
Connect to the wireless VPN firewall by typing either of these
URLs in the address field of your browser, then press Enter:
http://www.routerlogin.net
http://www.routerlogin.com
The wireless VPN firewall will prompt you to enter the user
name of admin and the password. The default password is
password.
Connect to the wireless VPN firewall by typing the IP address
of the wireless VPN firewall in the address field of your
browser, then press Enter. 192.168.1.1 is the default IP
address of the wireless VPN firewall. The wireless VPN
firewall will prompt you to enter the user name of admin and
the password. The default password is password.

Connecting the Firewall to the Internet

v1.0, October 2005