How To Configure Wpa And Wpa2 With Radius - NETGEAR ProSafe FVG318 Reference Manual

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
3. Select WPA2 with Radius on the pulldown menu. The WPA2 with Radius menu will open.
Encryption: There is no choice for encryption; this is displayed for your information. For
WPA2 with Radius, AES is used.
4. Enter the Radius settings.
• Primary Server Name/IP Address: This field is required. Enter the name or IP address
of the primary Radius Server on your LAN.
• Secondary Radius Server Name/IP Address: This field is optional. If you have a
Secondary Radius Server on your LAN, enter its name or IP address here.
• Radius Port: Enter the port number used for connecting to the Radius Server.
• Shared Key: Enter the desired value for the Shared Key. This must match the value used
on the Radius server.
5. Click Apply to save your settings.

How to Configure WPA and WPA2 with Radius

Note: Not all wireless adapters support WPA and WPA2. Furthermore, client software is required
on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software
that supports WPA and WPA2. Nevertheless, the wireless adapter hardware and driver must also
support WPA and WPA2. Consult the product document for your wireless adapter and WPA and
WPA2 client software for instructions on configuring WPA and WPA2 settings.
To configure WPA and WPA2 with Radius, follow these steps:
1. Log in at the default LAN address of http://192.168.1.1 with the default user name of admin
and default password of password, or using whatever LAN address and password you have
set up.
Wireless Configuration
v1.0, October 2005
4-15