Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Log in at the default address of http://192.168.1.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of
2. Use the VPN Wizard to configure the FVG318 at Gateway A.
Follow the steps listed in
illustrated in
Figure B-7 on page
•
Connection Name: Scenario_1 (in this example)
•
Pre-Shared Key: 12345678 (in this example), must be the same at both VPN tunnel
endpoints
•
Remote WAN IP address: 22.23.24.25 (in this example), must be unique at each VPN
tunnel endpoint
•
Remote LAN IP Subnet
–
IP Address: 172.23.9.1 (in this example), must be unique at each VPN tunnel endpoint
–
Subnet Mask: 255.255.255.0 (in this example)
3. Log in to the FVG318 labeled Gateway B as in the illustration
Log in at the default address of http://192.168.1.1 with the default user name of admin and
default password of password (or using whatever password and LAN address you have
chosen).
Note: Based on the network addresses used in this example, you would log in to the
LAN IP address of
4. Repeat the process using the VPN Wizard to configure the FVG318 at Gateway B.
Figure 2-6
VPN Configuration of NETGEAR FVG318
http://10.5.6.1
Figure B-2
and
Figure B-3
B-9:
http://172.23.9.1
v1.0, October 2005
at Gateway A.
using the following parameters as
(Figure
at Gateway B.
B-5).
C-7