NETGEAR ProSafe FVG318 Reference Manual page 198

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
• Under My Identity, select Domain Name for the ID Type and then enter fvs_remote.
(Domain Name must match the Remote Identity Data parameter of the IKE Policy
Configuration screen shown in
Figure B-17
f. Verify the Authentication (Phase 1) and Key Exchange (Phase 1) Proposal 1 screen
parameters (see
Configuration screen shown in
Figure B-18
C-22
Figure B-13
Figure B-18) match the IKE SA Parameters of the IKE Policy
Figure B-13
v1.0, October 2005
for the gateway router.)
for the gateway router.
VPN Configuration of NETGEAR FVG318
Pre-Shared Key
must be the same
at both ends of
the VPN tunnel