NETGEAR ProSafe FVG318 Reference Manual page 29

Reference Manual for the ProSafe Wireless 802.11g VPN Firewall Model FVG318
Figure 3-5
Note: If you do not see this page, type http://www.routerlogin.net in the browser
address bar and press Enter. If you still cannot see this screen, see
Bypass the Configuration Assistant" on page
If you cannot connect to the wireless VPN firewall, verify your computer networking setup. It
should be set to obtain both IP and DNS server addresses automatically, which is usually so.
For help with this, see
animated tutorials on the Resource CD.
2. Click OK. Follow the prompts to proceed with the Smart Wizard Configuration Assistant to
connect to the Internet.
3. Click Done to finish. If you have trouble connecting to the Internet, see
Tips" on page 3-6
Connecting the Firewall to the Internet
"Preparing a Computer for Network Access:" in Appendix A
to correct basic problems.
v1.0, October 2005
"How to
3-10.
"Troubleshooting
or the
3-5