Changing The Mobile User Name And Password - Lorex ECO 2 Instruction Manual

Remote Viewing Using a Web Browser
• SSL: Select ON/OFF to enable/disable Secure Socket Layer protocol.
• SMTP Port: Enter your SMTP address.
• SMTP Server: Enter your SMTP Server.
• Sender Email: Enter the sender email address. This can be any address of your choice.
• Sender Password: Enter your email server's password.
• Receiver Email: Enter the recipient's email address.
• Interval: Enter the interval the DVR waits before sending a new email notification.
2 Click Save to save your settings.

Changing the Mobile User Name and Password

You can change the User Name and Password used to connect to the system with a mobile
device.
To change the mobile user name and password:
1 Click the Remote Setting tab, and click Network>Mobile.
2 Under User Name, enter the desired mobile user name (default: admin).
3 Under Password, enter the desired mobile password (default: 0000).
NOTE: The user name and password applies only to mobile devices connecting to the system.
4 Click Save to apply your settings.
NOTE: The DVR may reboot after the settings are changed.
76