Lorex ECO 2 Instruction Manual page 145

• 16-channel model only: BNC to RCA adapters (not included) are required to connect RCA
devices to BNC ports. Use the included Audio Harness cable to connect Audio for channels
5~16.
3 Right-click to open the Menu Bar and click the Main Menu button (
4 Click Record and select the MainStream tab.
5 Ensure the Audio checkbox is checked next to the channel the audio-enabled camera is
connected to.
6 Click Apply to save your changes.
Appendix J: Recording Audio
).
Check Audio to enable audio
recording on each channel
129