11A-5a-2
4G1 ENGINE (E - W) -
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
Intake Manifold and Throttle Body (GDI)
REMOVAL SERVICE POINT
AA" INTAKE MANIFOLD REMOVAL
Disconnect the fuel pressure sensor connectors.
INSTALLATION SERVICE POINTS
"AA INTAKE MANIFOLD INSTALLATION
After installing the intake manifold, connect the fuel pressure
sensor connectors.
"BA INTAKE MANIFOLD STAY INSTALLATION
Ensure that the intake manifold stay is in close contact with
the intake manifold and the cylinder block boss. After that,
tighten the bolts to the specified torque.
Nov. 1995
Aug. 2000
PWEE9520
PWEE9520-D
Added