Stopover Function - Mercedes-Benz COMAND Operator's Manual

Navigation
During route guidance

Stopover function

This function allows you to select an
intermediate destination while route
guidance is active. A stopover destination
may be a gas station or a restaurant or any
other place. When the route to the
stopover destination is calculated, the
system calculates the route from the
stopover destination to the main
destination.
Entering a stopover destination
Activate the soft key display
( page 140).
Stopovr
Press the soft key.
The map is displayed in full view.
or
The Stopover still active menu will
appear ( page 146) if a stopover
already exists.
144
Available soft keys
After pressing a softkey on the left side, a
corresponding list ( page 145) or, if a POI
is close by, the map will appear with one
POI spotlighted ( page 160).
soft key:
Shows a list of Mercedes-Benz Centers
near your location.
soft key:
Shows a list of filling stations or the
map with one filling station spotlighted.
soft key:
Shows a list of parking facilities or the
map with one parking facility
spotlighted.
soft key:
Shows a list of restaurants or the map
with one restaurant highlighted.
soft key:
Shows a list of hospitals or the map
with one hospital spotlighted.
If you press this soft key the following
warning message will appear: