Navigation Displays - Mercedes-Benz COMAND Operator's Manual

Navigation displays

The navigation displays are only visible
while route guidance is active.
To switch to the navigation display from
another display, e.g. from CD operation:
Press b or c.
Two examples are shown below:
Display example 1:
The road you are currently driving on is
shown on the status bar, in this case
EAST I-90 571 mi
. The indication
distance to the next driving maneuver.
i
Using the control system, the display
unit can be changed between km or
miles (see your vehicle's Operator's
Manual).
When the instrument cluster
multifunction display is set to miles,
the COMAND will indicate
distances in miles (mi) or feet (ft).
When the instrument cluster
multifunction display is set to
kilometers, the COMAND will
indicate distances in kilometers
(km) or meters (m).
Important map symbols:
Current vehicle location and direction
is the
of travel y
If the map orientation
( page 149) is chosen, the arrow will
always point upward.
The remaining route section is
highlighted in blue color.
i
The colored highlight only appears
when the system has completed the
route calculation.
Navigation
Route guidance
Heading Up
131