Mercedes-Benz COMAND Operator's Manual page 47

Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 MHz.
The station you have selected will
begin to play.
Frequency band Frequency range
FM 87.7 - 107.9 MHz
AM 530 - 1710 kHz
FM, AM band
Entries outside the frequency range are
not accepted. The message
observe frequency range 87.7 - 107.9
MHz
will appear briefly.
i
If you do not make another entry within
8 seconds, the function will be canceled
and you will continue listening to the
station last tuned to.
Preset station selection via number
keypad
FM- and AM-Bands
Press one of the number keys, such as
2 briefly.
The radio will tune to the frequency as-
signed to that memory location. If none
has been set by you, the radio will not
change the station.
i
FM and AM presets are independent
Please
and can only be accessed while in the
corresponding band.
Saving stations for FM and AM
( page 48).
Automatic station scan (FM, AM)
The stations on the same band (FM, AM)
can be scanned one after the other for 8
seconds each.
Radio operation
i
In the AM band, two search runs take
place. During the first run, stations with
good reception are played. During the
second run, stations with weaker
reception are played.
Start scan function
Activate the desired wave band
( page 44).
Scan
Press the soft key.
The scan function will begin.
Audio
47