Selecting Display Settings - Mercedes-Benz COMAND Operator's Manual

System
System settings
The respective tones are activated or
deactivated. You hear the tone when
you activate it.
Back
Press the soft key.
The System settings menu will appear.
The setting is saved.

Selecting display settings

In the System menu, press the
soft key.
Option Symbol
Display mode selected _
-
Display mode not
selected
172
You can use the following functions:
set the display dimming characteristics
adjust the display brightness
Setting the display dimming
characteristics
Push the joystick to G or g to
select an entry.
Display
Day mode
The display is continuously set to
daylight design.
Night mode
The display is continuously set to night-
time design.
Automatic
The display changes depending on the
ambient light sensor in the vehicle.
Press E.
The setting is applied. The System
settings menu will appear.
Adjusting the display brightness
Bright.
Press the soft key.
Push the joystick to H or h
direction to adjust the brightness.
or
Bright.
Press the soft key longer than
2 seconds.
The display brightness changes
gradually. When the slider reaches the
end of the left or right border, it starts
moving into the opposite direction.
Bright.
Release the soft key when the
desired brightness is reached.