Mercedes-Benz COMAND Operator's Manual page 174

System
System settings
Voice control individualization
The individualization function is used to
adapt the voice control to your own voice
and to therefore improve speech
recognition. This does not affect speech
recognition of other users.
Individualization consists of two stages.
The first stage involves training digits,
while the second stage trains specific
commands.
Open the System menu ( page 170).
VC Tips
Press the soft key.
The Voice control menu will appear.
Push the joystick to G to select the
Individualization
menu item.
Press E.
The Individualization menu will appear.
174
Starting individualization
i
You can only activate the individualiza-
tion function when the car is station-
ary. If the car is moving, the following
message will appear:
Individualization only possible
when car is stationary
Push the joystick to g to select menu
Start new individualization
item
Press E.
The individualization process starts.
The system now guides you through
the individualization process using a
dialog, all operations are voice inputs.
After completion of the first stage, the
system prompts you to save the data of the
first stage.
If you do not save the first stage:
Individualization is cancelled,
Data from an existing first stage
remains unchanged.
If you save the first stage:
Data from an existing first stage is
over-written but is not saved until the
second stage is started.
If you do not start the second stage:
Data from the first stage remains
.
unchanged,
The individualization process is
.
finished.