Mercedes-Benz COMAND Operator's Manual page 61

With the number keypad
Activate the CD main menu
( page 58).
Press *.
An input line will appear in the CD main
menu.
1 Number of tracks on CD corresponds
with the valid number range
2 Input line
E.g.: Track 14.
Press 1 and 4 in short succession.
i
Entries higher than the number of
tracks available on the CD are not
possible.
During MP3 playback
CD drive:
You can select the tracks of the
current folder ( page 72).
CD changer:
You can select the first 99 tracks of
a MP3 CD.
After entering the track number, wait
approximately 3 seconds.
The selected track is played. The CD
main menu is displayed.
CD track scan
The tracks on a CD can be scanned one
after the other for 8 seconds each. The
function will switch off automatically when
the starting track is reached. You can also
manually stop the scan function.
CD operation
Activating
Scan
Press the soft key.
Scan will begin.
i
When you start the scan function, the
Normal sequence
playback mode
( page 63) is automatically activated.
Audio
61