Mercedes-Benz COMAND Operator's Manual page 145

More
soft key:
If you press this soft key, the
Navigation main menu ( page 108)
Enter stopover
will appear.
appear on the status bar.
You can now enter an stopover
destination by
selecting one from the destination
memory ( page 154)
typing one in the Enter street menu
( page 112)
Last
selecting one in the
destinations
memory
( page 153)
selecting a Point of interest
( page 157)
entering a POI by phone number
( page 161)
Today's
selecting one in the
plan
memory ( page 163)
Press a soft key, e.g.
One of the following displays will
appear
will
a list with restaurants (see below)
the map with one restaurant
spotlighted if the POI is close by.
Select a POI on the map
( page 160).
The arrows indicate the direction of the
destination. The distances indicated are
straight line distances to the destination.
. Selecting a POI in a list
Push the joystick to G or g to
select an entry.
Use the
wise through the list (if available).
Press the
Details on the destination are shown.
After you have selected a destination,
press E.
The Start route guidance menu will
appear ( page 129).
Press E.
The system calculates the route to the
selected stopover destination. After
that, the route to the main destination
is also calculated from the stopover
destination.
Navigation
During route guidance
Page
soft keys to scroll page-
Details
soft key if required.
145