Location Of Sfps And Fiber-Optic Cables; Unlocking The Sfp Module Latch - Plastic Variety - IBM TotalStorage DS4300 Installation, User's, And Maintenance Manual

Figure 79. Location of SFPs and fiber-optic cables
Protective cap
Figure 80. Unlocking the SFP module latch - plastic variety
112
IBM TotalStorage DS4300 Fibre Channel Storage Subsystem: Installation, User's, and Maintenance Guide
SFP module
Fiber-optic
cable
After removing the fibre-channel cables, insert the protective caps.
7. Use the following procedure to remove the SFPs from the RAID controller to
be upgraded.
a. Remove the LC-LC fibre-channel cable from the SFP module. For more
information, see "Handling fiber-optic cables" on page 33.
b. Unlock the SFP module latch:
v For SFP modules that contain plastic tabs, unlock the SFP module latch
by pulling the plastic tab outward 10°, as shown in Figure 80.
Plastic tab
o
10
v For SFP modules that contain wire tabs, unlock the SFP module latch by
pulling the wire latch outward 90°, as shown in Figure 81 on page 113.
Raid controller
SFP module