|
|
|
|
|
|
|
|
|
|
|
|
Loop A
Figure 48. Connecting EXP100, EXP700, or EXP710 drive loop A to the DS4300
2. Connect drive loop B to the DS4300 Storage Subsystem, as shown in Figure 49
on page 66.
Starting with the first storage expansion enclosure in the loop, connect the Out
port on the right ESM board to the expansion port located in the DS4300
controller B module/CRU.
Leave the In port on the right ESM board on the last storage expansion
enclosure unoccupied.
Loop B
d4300_41a
Chapter 3. Cabling the storage subsystem
65