Wireless Lan Card - Toshiba Satellite M500 Maintenance Manual

4 Replacement Procedures

4.6 Wireless LAN card

Removing the Wireless LAN card
To remove the wireless LAN card, make sure the computer is in boot mode and powered
off, follow the steps below and refer to Figures 4-9 to 4-10.
NOTE: The wireless LAN card is an option.
CAUTION: Do not try to remove the wireless LAN card with the computer turned
on. The computer or the wireless LAN card can be damaged. Do not
touch the connectors on the wireless LAN card module on the computer.
Debris on the connectors may cause wireless LAN card access problems.
1. Loosen the screw (with an e-ring) and remove the Wireless LAN card cover.
2. Remove one piece of tape and the following screw then the wireless antennas.
M23L
SatelliteM500/M500D Maintenance Manual [CONFIDENTIAL]
Figure 4-9 Remove Wireless LAN card cover
FLAT HEAD screw
2
4-23