4.9 Bluetooth
Removing the Bluetooth
To remove the Bluetooth, follow the steps below and refer to Figures 4-18 to 4-19.
1.
Remove two pieces of tape.
2.
Take the bluetooh away from the top cover.
3.
Remove the mylar on the fingerprint board.
4.
Separate the cable from the connector according to the direction of the arrow.
4-32
Figure 4-18 Removing Bluetooth
Figure 4-19 Disconnecting Bluetooth cable
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
Mylar
Tap