4.19 VGA Card
Removing the VGA Card
To remove the VGA card, follow the steps below and refer to Figures 4-42.
1. Remove the following screws securing the VGA.
M23L
2. Remove the VGA Card from the slot at the pop-up angle
Figure 4-42 Removing screws securing VGA Card
Install the VGA Card.
To install the VGA Card, follow the steps below and refer to Figures 4-42.
1. Insert the VGA Card into connector at an angle about 45
2. Secure the VGA Card with the following screws.
M23L
4-56
FLAT HEAD screw
FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
2
2