Main Pcb - Toshiba Satellite M500 Maintenance Manual

4 Replacement Procedures

4.13 Main PCB

Remove the main PCB
To remove the main PCB, follow the steps below and refer to Figures 4-25 to 4-30.
1. Remove 7 pieces of tape and the LVDS screw.
1
M2X2.5 FLAT HEAD screw
2. Remove cables on the main PCB.
Figure 4-25 Removing tapes and LVDS screw
Figure 4-26 Removing cables
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4-40