Toshiba Satellite M500 Maintenance Manual page 197

Install the FAN.
To install the FAN, follow the steps below and refer to Figures 4-43 to 4-44.
1. Apply new thermal pad on the fan as shown in the following figure. Stick the
thermal pad on fan follow the mark. (Be sure to clean off all old pad before
applying new thermal pad).
2. Install the Fan to the main board.
3. Secure the Fan with the following screws.
M24L
4. Connect the cable.
4-58
Figure 4-44 Apply new thermal pad on the fan
FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
H000013110
3