Installing the LED board
To install the LED board, follow the steps below and refer to Figures 4-21 to 4-23.
1. Securing the board.
2. Install the LED board and the Fingerprint Board on the top cover.
3. Secure the following screws on the Top cover.
M23.5L
4. Install the bracket then securing the following screws.
M23.5L
M23L
5. Connect the cable to the board.
4-38
FLAT HEAD screw
FLAT HEAD screw
FLAT HEAD screw
[CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
4 Replacement Procedures
4
4
2