Table of Contents
Advertisement
TD-W8962ND
•
The default Password: admin
•
The default Subnet Mask: 255.255.255.0
Note:
All changed settings will be lost when defaults are restored.
4.16.8 Firmware Upgrade
Choose menu "System Tools → Firmware Upgrade", and then you can update the latest
version of firmware for the Modem Router on the following screen.
Firmware Version: Displays the current firmware version.
Hardware Version: Displays the current hardware version. The hardware version of the
upgrade file must accord with the Modem Router's current hardware version.
To upgrade the Modem Router's firmware, follow these instructions below:
1)
Download a most recent firmware upgrade file from our website (www.tp-link.com).
2)
Enter or select the path name where you save the downloaded file on the computer into the
File Name blank.
3)
Click the Upgrade button.
4)
The Modem Router will reboot while the upgrading has been finished.
Note:
1)
New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Modem Router rather than
the configuration, you can try to upgrade the firmware.
2)
When you upgrade the Modem Router's firmware, you may lose its current configurations, so
before upgrading the firmware please write down some of your customized settings to avoid
losing important settings.
3)
Do not turn off the Modem Router or press the Reset button while the firmware is being
upgraded. Loss of power during the upgrade could damage the Modem Router.
4)
The firmware version must correspond to the hardware.
5)
The upgrade process takes a few moments and the Modem Router restarts automatically
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-69
72
Advertisement
Table of Contents
