TP-Link TD-W8962ND User Manual page 21

300mbps wireless n adsl2+ modem router

Table of Contents

TD-W8962ND

Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.

Note:

You can configure the PC to get an IP address automatically, select "Obtain an IP address

automatically" and "Obtain DNS server address automatically" in the screen above.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the Start menu on your desktop, select run tab, type cmd or command in the field

and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the

Modem Router has been established.

300Mbps Wireless N ADSL2+ Modem Router User Guide

Figure 3-4

Figure 3-5

Table of Contents