Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. TD-W8961NB
  6. Installation manual

TP-Link TD-W8961NB Installation Manual

Hide thumbs Also See for TD-W8961NB:

Advertisement

Quick Links

Download this manual See also: User Manual
Installation
Note
The product model shown in this QIG is TD-W8961ND, as an example.
Please use only wired network connections to configure the Modem
Note
Router.
If you currently use a modem, disconnect it now - the Modem Router will
replace your current modem.
Connect your computer to
the Port labeled "1~4" on
the Modem Router with an
Ethernet cable.
Connect the splitter to the wall
j ack using a telephone line,
then use the other telephone
line to directly connect it to the
A DSL port on the Modem
Router and the MODEM port
of the splitter, also have the
PHONE port of the splitter
connected to a telephone.
If no telephone is needed, please connect the ADSL port of the Modem
Note
Router to the wall jack using the telephone line directly.
1

Advertisement

loading

Related Manuals for TP-Link TD-W8961NB

Summary of Contents for TP-Link TD-W8961NB

  • Page 1 Installation Note The product model shown in this QIG is TD-W8961ND, as an example. Please use only wired network connections to configure the Modem Note Router. If you currently use a modem, disconnect it now - the Modem Router will replace your current modem.
  • Page 2 Plug the provided Power A dapter into the Power jack on the back of the Modem Router and the other end to a standard electrical wall socket. Power on all your network devices and then check to see if the LEDs of the Modem Router display normally as the diagram below describes.
  • Page 3 To configure the device, you can either run the setup CD (method one), or run Note the Web-based Quick Setup Wizard (method two). TP-LINK strongly recommends that you run the setup CD. Insert the provided Resource CD into your CD-ROM drive.
  • Page 4 The basic settings for your Modem Router are completed. Please open the web browser and try to log on to some popular website to test your Internet connection, for example: http://www.tp-link.com http://www.google.com If the above websites can be accessed, it indicates that your Modem Router has been configured successfully and you can start to enjoy the Internet.

  • Page 5: Troubleshooting

    Troubleshooting T1. How do I restore my Modem Router’s configuration to its factory default settings? With the Modem Router powered on, press and hold the RESET button on the rear panel for 8 to 10 seconds before releasing it. Press it for 8 to 10 seconds Once the Modem Router is reset, the current configuration settings will be Note lost and you will need to re-configure the Modem Router.
  • Page 6 Click Change adapter settings Right-click Local Area Connection Click Properties Double-click Internet Protocol V ersion 4 (TCP/IPv4)
  • Page 7 Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK For Windows Vista OS Go to Start > Settings >Control Panel, and then you will see the following page. Click View network status and tasks Click View status...
  • Page 8 Click Properties Double-click Internet Protocol V ersion 4 (TCP/IPv4)
  • Page 9 Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK For Windows XP OS Go to Start > Control Panel, you will then see the following page. Click Network and Internet Connections...
  • Page 10 Click Network Connections Right-click Local Area Connection Click Properties Double-click Internet Protocol (TCP/IP)
  • Page 11 Select Obtain an IP address automatically Select Obtain DNS server address automatically Click OK Click OK...
  • Page 12 2) Configure your IE browser. Open your IE browser, click Tools tab and you will see the following screen. Click Internet Options Select Never dial a connection Click OK Now, try to log on to the Web-based configuration page again after the above settings have been configured.
  • Page 13 Modem Router by following the instructions of this QIG. 5) Please feel free to contact our Technical Support if the problem still exists. For more details about Troubleshooting and Technical Support contact Note information, please log on to our Technical Support Website: http://www.tp-link.com/en/support...
  • Page 14 Appendix Login Open your web browser and type 192.168.1.1 in the address bar and press Enter A dialog box will prompt you for the User name and Password. Ente r the default values and click OK. User name: admin Password: admin Click OK If the dialog box does not pop up, please refer to T3 in the Troubleshooting Note...
  • Page 15 Internet Parameters Configuration This page will then display. Click RUN WIZARD Click NEXT Select the appropriate Time Zone for your location from the drop-down list Click NEXT Choose the Connection Type given by your ISP. If PPPoE/PPPoA is selected, please proceed to A;...
  • Page 16 A. Configuration for PPPoE/PPPoA This page will then display. Enter the PPPoE/PPPoA information provided by your ISP Click NEXT Note If you did not get the VPI, VCI and Connection Type information, please contact your ISP for this information. B. Configuration for Dynamic IP This page will then display.
  • Page 17 D. Configuration for Bridge Mode This page will then display. Enter the Bridge information provided by your ISP Click NEXT A fter completing the above configuration, please proceed to Wireless Settings Configuration Wireless Settings Configuration This page will then display. Keep the default setting: Activated.
  • Page 18 Quick Start Complete To continue, the following page will be displayed. Click NEXT Click CLOSE Now, your Modem Router has been configured and is rebooting. Please do not turn off the Modem Router while it’s rebooting.

  • Page 19: Technical Support

    08:00 AM to 08:00 PM Turkey Indonesia Tel: 444 19 25 (Turkish Service Tel: (+62) 021 6259 135 E-mail : support.id@tp-link.com E-mail: support.tr@tp-link.com Service time : Monday to Friday Service time: 9:00 AM to 6:00 PM 9:00 -12:00; 13:00 -18:00...