TP-Link TD-W8962ND User Manual page 15

TD-W8962ND 300Mbps Wireless N ADSL2+ Modem Router User Guide
WPS: The switch for the WPS function. For details, please refer to 4.6.2 WPS Settings.
RESET: There are two ways to reset the Modem Router's factory defaults.
Method one: With the Modem Router powered on, use a pin to press and hold the Reset
button for at least 5 seconds. And the Modem Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Modem
Router's Web-based Utility.
WiFi: The switch for the WiFi function.
LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Modem Router
to your PC or the other Ethernet network devices. Enable EWAN function and you will be able
to connect to Cable/FTTH/VDSL/ADSL device.
ADSL: Through the port, you can connect the Modem Router with the telephone. Or you can
connect them by an external separate splitter. For details, please refer to 2.3 Connecting the
Modem Router.
Antennas: Used for wireless operation and data transmit.
6