Enabling And Disabling Spanning Tree On A Bridge; Adding A Port To A Vlan; Creating A Vlan - 3Com SuperStack II Manual

116 C 4: W
HAPTER ORKING
Enabling and
Disabling Spanning
Tree on a Bridge
Adding a Port to a
VLAN

Creating a VLAN

W C L
ITH THE OMMAND INE
You can enable or disable spanning tree on a bridge of the current Switch
unit using the
stpState
To enable or disable spanning tree on a bridge:
1 At the Top-level menu, enter:
bridge stpState
The following prompt is displayed:
Enter new value (disable, enable) [disable]:
2 Enter or
enable disable
You can add a single port to a VLAN, or add all ports on the current
Switch unit to the selected VLAN using the
VLAN menu.
To add a port to a VLAN:
1 At the Top-level menu, enter:
bridge vlan addPort
The following prompt is displayed:
Select VLAN ID (1-4094) [1]:
2 Enter the number of the VLAN ID that you wish to add a port to.
The following prompt is displayed:
Enter port (1-12, all):
3 Enter the port number to be added to the VLAN, or enter
on the current Switch unit to be added.
The following prompt is displayed:
Enter tag type (none, 802.1Q):
4 Enter the tagging information for the port added to the VLAN.
You can create a VLAN using the
To create a VLAN:
1 At the Top-level menu, enter:
bridge vlan create
I
NTERFACE
command on the Bridge menu.
.
create
command on the
addPort
for all ports
all
command on the VLAN menu.