Enabling And Disabling Router Port Auto-Discovery; Manually Identifying A Router Port; Displaying All Router Ports - 3Com SuperStack II Manual

108 C 4: W
HAPTER ORKING
Enabling and
Disabling Router Port
Auto-Discovery
Manually Identifying
a Router Port
Displaying all Router
Ports
W C L
ITH THE OMMAND INE
You can enable or disable router port auto-discovery for all Switch units in
the stack using the
The default setting for the Switch is router port auto-discovery enabled,
with no manually identified router ports. You can manually identify router
ports with auto-discovery enabled.
To enable or disable router port auto-discovery:
1 At the Top-level menu, enter:
bridge multicastFiltering routerPort autoDiscovery
The following prompt is displayed:
Enter new value (enable, disable) [enable]:
2 Enter or
enable disable
You can manually identify router ports for all Switch units in the stack
using the
addPort
To manually define a router port:
1 At the Top-level menu, enter:
bridge multicastFiltering routerPort addPort
The following prompt is displayed:
Select unit for router port (1-4) [1]:
2 Enter the number of unit for the router port.
The following prompt is displayed:
Select router port (1-12):
3 Enter the number of the router port.
You can display a list of router ports for all Switch units in the stack using
the command on the Router Port menu.
list
This list displays all router ports whether manually configured, or
automatically learned via auto-discovery.
To display all router ports:
1 At the Top-level menu, enter:
bridge multicastFiltering routerPort list
I
NTERFACE
command on the Router Port menu.
autoDiscovery
.
command on the Router Port menu.