3Com SuperStack II Manual page 51

Unit Status — This page allows you to display the general
administration details of the Switch.
IP Setup — This page allows you to set up IP information for the
Switch.
Port Setup — This page allows you to configure individual ports
on the Switch.
Console Port Configuration — This page allows you to configure
the console port of the Switch.
For more information, see
page 54.
Management Settings Pages — These pages allow you to change
the management settings for the stack:
System Name — This page allows you to specify a descriptive
name for the stack.
Password Setting — This page allows you to change your
password.
Location — This page allows you to specify the physical location
of the stack.
Getting Started — This page allows you to access the Getting
Started pages for the stack.
Documentation — This page allows you to specify the location of
the online help and documentation for the stack.
Contact — This page allows you to specify the details of a person
to contact about the stack.
For more information, see
the Stack" on page 67.
Configuration Pages — These pages allow you to configure the
stack as a whole:
VLAN Setup — This page allows you to configure VLANs for the
stack.
Switch Database — This page allows you to configure the Switch
Database of the stack.
Software Upgrade — This page allows you to upgrade the
management software of the Switch units in the stack.
The Main Web Interface
"Configuring the Current Switch"
"Changing the Management Settings for
51
on