Risers - Speed Queen Stacked Washers and Dryers Installation Instructions Manual

COLD
HOT
6
1 Water Faucet
2 Blue Coded Fill Hose
3 Plain Rubber Washer
4 Hose Coupling
5 Red Coded Fill Hose
6 Filter Screens
Figure 5
IMPORTANT: Hoses and other natural rubber
parts deteriorate after extended use. Hoses may
develop cracks, blisters or material wear from the
temperature and constant high pressure they are
subject to.
All hoses should be checked on a monthly basis for
any visible signs of deterioration. Any hose showing
the signs of deterioration listed above should be
replaced immediately. All hoses should be replaced
every five years.
1
4
1 Water Faucets
2 Cold Water Connection
3 Hot Water Connection
4 Water Fill Hoses
Figure 6
802714R5
1
3
2
4
5
TLW1976N
2
WATER
MIXING VALVE
3
SWD596N
SWD596N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
IMPORTANT: Turn off water supply faucets after
check-out and demonstration. Owner should turn
off water supply whenever there will be an
extended period of non-use.
NOTE: Longer fill hoses are available (as optional
equipment at extra cost) if the hoses supplied with
the washer are not long enough for the installation.
Order hoses as follows:
No. 20617 Fill Hose (8 feet) (2.44 m)
No. 20618 Fill Hose (10 feet) (3.05 m)

Risers

Risers (or air cushions) may have to be installed if the
pipes knock or pound when flow of water stops. The
risers are more efficient when installed as close as
possible to the water supply faucets (refer to Figure 7).
1
1 Water Supply Faucets
2 Risers (Air Cushions)
Figure 7
2
W005I
W005I
9