Console Descriptions - Vision Fitness S7100 Owner's Manual

PREMIER CONSOLE DISPLAY DESCRIPTIONS
A. START/PAUSE/HOLD TO RESET
Press the START key to begin a MANUAL workout immediately without
having to set individual information. When the program begins, you
have the ability to adjust incline and resistance levels with the ARROW
keys. Feedback information will be calculated using default settings.
PAUSE:
If you need to PAUSE your program during a workout, pressing
the START key will PAUSE your program for five minutes. Pressing
START will return you to your workout.
RESET:
If you need to RESET the console during your workout, you can
do so by holding down the START key for three seconds or until the
display resets.
B. ENTER/HOLD TO CHANGE FEEDBACK DISPLAY
This key is used after entering each piece of information in setup such
as Age, Weight, or Level.
SCAN:
When exercising in a program, pressing the ENTER key will
allow you to change what is displayed in the Heart Rate Feedback
window. Press ENTER to switch between Heart Rate and % Max.
Heart Rate. If you hold down the ENTER key for three seconds during
your workout, the SCAN function will automatically alternate
feedback display views.
C. RESISTANCE ARROW KEYS
These keys are used to change values in setup mode prior to your workout.
During your workout, they are used to change resistance levels.
In HRT programs, they are used to change your target heart rate.
®
D. INCLINE ARROW KEYS
These keys can be used to change values in setup mode prior to your workout.
During your workout, they are used to change incline levels.
E. PROGRAM KEYS
These keys provide quick access to your favorite workouts. There is no
need to scroll through the programs to find the one you want. Simply
press the program key you want and you begin user setup.
CHANGE ON THE FLY:
pressing another program key. The SPRINT 8™, SCULPTOR, and
CUSTOM USER programs can not be changed to or from "on the fly".
You can change your program "on the fly" by simply
21