IBM xSeries 300 Hardware Maintenance Manual page 54

5. Touch the static-protective package containing the DIMM to any unpainted
6. Install the DIMM in the connector.
7. If you removed the PCI adapter as described in step 4, install it now.
8. If you have other options to install or remove, do so now.
9. Replace the server cover. For more information on replacing the cover, see
46
Hardware Maintenance Manual: xSeries 300
metal surface on the server. Then, remove the DIMM from the package.
Connector 2
Connector 3
Connector 4
Attention: To avoid breaking the retaining clips or damaging the DIMM
connectors, handle the clips gently.
Attention: To prevent damage to the DIMM connectors, do not force the
DIMM into the connector.
a. Turn the DIMM so that the index slots align correctly with the connector.
Note: The DIMM has two index slots, one in the center and the other on
the left half of the DIMM connector edge.
b. Insert the DIMM into the connector by pressing on both corners of the
DIMM at the same time. Be sure to press it straight into the connector.
c. When installing a DIMM, be sure that no gap exists between the DIMM and
the retaining clips. If a gap does exist between the DIMM and the retaining
clips, remove the DIMM; then, reinsert it properly.
"Installing the cover" on page 53.
Connector 1