Server Controls And Indicators; Front View - IBM xSeries 300 Hardware Maintenance Manual

Server controls and indicators

The following section identifies the controls and indicators on the front and rear of
your server.

Front view

Power control
button
Power-control button: Press this button to manually turn the server on or off.
Power-on light: This green LED lights and stays on when you turn on your server,
and it blinks when the server is in standby mode.
Reset button: Press this button to reset the server and run the power-on self-test
(POST). You might need to use a pen or the end of a straightened paper clip to
press the button.
System-error light: This amber LED lights when a system error occurs.
Diskette drive activity light: When this LED is on, it indicates that the diskette
drive is in use.
Diskette-eject button: Push this button to release a diskette from the drive.
CD eject button: Push this button to release a CD from the drive.
CD drive activity light: When this light is on, it indicates that the CD-ROM drive
is in use.
Power-on System error
light (green) light (amber)
Reset
button
CD activity CD eject button
light (green)
Diskette drive
activity light
(green)
Diskette eject
button
Chapter 2. General information
7