Remote Controls (Console Mounted Zero Effort) - Mercury HP 500 EFI Bravo XR/XZ/III User Manual

CB184

Remote Controls (Console Mounted Zero Effort)

1 Throttle Control Lever(s) - Operation of the throttle is controlled
by the movement of the longer control lever(s). "Pushing" the
control lever forward increases engine speed. Detentes are used
to give the movement of the lever a "notched" precise feel. The
detentes also help to hold the lever at the desired engine rpm to
reduce operator fatigue.
Never shift unit into or out of gear unless the engine is at idle
rpm.
2 Shift Control Lever(s) - Shifting is controlled by the shorter con-
trol lever(s). This control shifts unit into gear with full lever move-
ment. Move lever forward to engage FORWARD gear. Move le-
ver backward to engage REVERSE gear. Lever in center position
shifts to NEUTRAL. Shifting should occur only with the engine at
idle speed. Always move to the desired gear position with a quick,
firm motion. The control handle should be adjusted by your deal-
er to engage forward, reverse and neutral when the lever is at the
appropriate detent.
3 Power Trim Switch - See "Power Trim" section for detailed
power trim operating procedures.
500 EFI Bravo
OPERATION
CAUTION
51