Mercury HP 500 EFI Bravo XR/XZ/III User Manual page 105

CB421hp
Propellers (XR, XZ Models)(cont.)
CB
INSTALLATION
4 Install Bravo XR/XZ Replaceable Hub Propeller Compo-
nents in Order shown:
a - Apply Lubricant to entire exposed surface of Propshaft.
Salt Water: Anti-Corrosion Grease (92-78376A-6)
Fresh Water: Anti-Corrosion Grease or Optimal Paste White
T Grease (92-847206)
b - Install prop hub assembly into propeller if removed
c - Propeller Assembly
d - Washer
e - Belleville Washer
f - Washer
g - Locknut
•
Tighten propeller nut to a minimum of 55 lb-ft (75 Nm).
After first use:
•
Retighten propeller nut to minimum 55 lb-ft torque (75 Nm).
•
Check propeller at least every 20 hours of operation.
•
Do not operate with loose propeller.
500 EFI Bravo
MAINTENANCE
101