Table of Contents
Advertisement
Engine Break-in
Severe damage to the engine can result by not complying with
the Engine Break-in Procedure.
•
Allow engine to warm-up for 30 - 60 seconds.
•
Do not exceed 3/4 throttle.
•
Avoid full throttle acceleration from IDLE speed.
•
Always vary throttle setting.
•
Run engine the majority of time between 3000 - 4500 rpm.
•
Frequently check crankcase oil level. Add oil if needed. It is nor-
mal for oil consumption to be high during break-in period.
CA211hp
After Break-In Period
To help extend the life of your MerCruiser power package, the
following recommendations should be considered:
•
Use a propeller that allows the engine to operate at or near the
top of the maximum rpm range (See "Specifications" section)
when at full throttle with a normal boat load.
•
Operation at 3/4 throttle setting or lower is recommended. Re-
frain from prolonged operation at maximum (full throttle) rpm.
•
Do not operate at full throttle until engine reaches normal oper-
ating temperature.
•
Follow the maintenance schedule in this manual.
500 EFI Bravo
OPERATION
CAUTION
5 HR. BREAK-IN PROCEDURE
AFTER 5 HR. BREAK-IN
39
Hide quick links:
Advertisement
Table of Contents
