To Input The Internet Parameters For The First Time - Panasonic DX-800 Fax Manual

Programming or Retrieving Parameters via Email

To Input the Internet Parameters for the First Time

Create a script in the message body of a plain text email and send it to your machine's email address. The
"Subject" line of the email must be as follows:
#set parameters(password)#
Important
The script sample to input the Internet Parameters is shown below.
(1) To
From
Subject
: where the "password" is the Remote Password programmed in your
machine's User Parameters.
Password in the User Parameters. [If the password was not
programmed, represent it with "( )" and assign a password now.
Ex: #set parameters( )#].
: Do not use the above command if these fields already contain data,
the existing information will be deleted and overwritten. Retrieve and
backup the existing data onto your PC first by following the
procedures for Retrieving and Editing the Internet Parameters on
pages 53 to 56.
(1)
(3)
(4)
(a)
(b)
(c)
(d)
(a)
(b)
(c)
(d)
(a)
(b)
(c)
(d)
: Your machine's email address.
: This field is normally not visible when creating new email message(s).
It is your default email address (email application), for retrieving the Internet
Parameters and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Store data, type: #set parameters(password)#
For security, always input a Remote
(2)
(5)
(6)
(7)
51