Directory Search Dialing - Panasonic DX-800 Fax Manual

Directory Search Dialing

When sending via LAN, the Directory Search function allows you to dial a full email address or telephone
number by searching for the station name or email address entered in the Auto Dialer and the LDAP
(Lightweight Directory Access Protocol) Server.
1
Set document(s) face down.
2a
or
2b
EMAIL
To search for email address.
3a
Enter the full station name or part of a station name by
using the Character keys. (See page 14)
Ex:
P A N A
If you make a mistake, press
character then re-enter the correct character.
or
3b
Enter the full or part of an email address using the
Character keys.
Ex: to search for xyz@panasonic.com
x
4
repeatedly until the display shows the station name and
telephone number / email address you want to send to.
The search priority is the LDAP Server first (retrieves up
to 50 stations per search), then it searches the Auto
Dialer.
To refine your search add additional characters to the
searched station name / email address.
5
Use the
format from Station Name & Email Address to Station
Name only or to Email Address only.
Continued on the next page...
Sending Documents via LAN
To search for the station name.
to search for PANASONIC
CLEAR
or
to change the retrieved station's display
ENTER STATION(S)
THEN PRESS START 00%
ENTER LETTER(S)
❚
❚
ENTER EMAIL ADDRESS
ENTER LETTER(S)
PANA❚
to erase the
x
xyz@panasonic.com
(01)Panasonic NY002
NEW_YORK@panasonic.c
x
xyz@panasonic.com
(01)Panasonic NY002
New_York@panasonic.c
(01)Panasonic NY002
(02)New_York@pasonic
or
93