Setting Date, Time, Logo And Facsimile Telephone Number - Panasonic KX-F1600 Operating Instructions Manual

Setting date, time, logo and facsimile
telephone number
Before using your unit, program the correct date and time, your logo and your facsimile telephone
number.
This information will be printed on the top of each page transmitted from your unit.
Setting the date and time
1 Press (MENU). (MENU)
SYSTEM SET UP
SET DATE £ TIME
2 Press (++), then (0! [1].
3 Press | START/SET |.
Al Enter the correct month/day/year/hour/minute by
selecting each 2 digits. (STOP)
Then press [3] for AM or [tt] for PM.
i (START/SET)
Example: Aug. 10 1996, 3:00PM aed dn START/SET
Press [0] 8] (1 0] [91e] (o 3] (e]o), then Note:
press [+] for PM. oWhen you make a mistake while
Press (START/SET). programming, press then make
5 corrections.
oThe accuracy of the clock will be
6 Press (MENU). approximately +60 seconds a month.
Setting your logo
Usually the logo is a company, division or personal name in an abbreviated form.
1 Press (MENU).
2 Press [#), then [0] [2].
Press | START/SET ) .
3
GIG
Enter your logo up to 30 characters.
Refer to the instructions on page 17.
Press | START/SET | .
Dial keypad
START/SET
Press (MENU).
ey CO) Jd Ey
16