Setting The Internet Parameters; Setting The User (Internet) Parameters - Panasonic DX-800 Fax Manual

Setting the Internet Parameters

Setting the User (Internet) Parameters

Before starting, you will need a completed copy of page 19 (Pre Installation Information). For your machine
to be able to operate on the Network properly, the following five (5) Basic Parameters must be pre-
programmed into the machine.
• IP Address
• Subnet Mask
• Default Gateway IP Address
• SMTP Server Name or IP Address
• Email Address
Note: If DHCP server is available on your network, the IP Address, Subnet Mask and Default Gateway
IP Address will be acquired automatically.
1
2
3
4
5
NOTE
48
7
1
repeatedly until display shows;
Enter the IP Address using the keypad. Press
to enter the period ".". (See Note 3)
Ex:
1 2 3 1 7 8
To continue setting other parameters, or press
to return to standby.
1. To scroll the display to desired User Parameter in Step 3, press
2. If the DNS Server is not available, change the setting of the Fax Parameter No. 161 (DNS
SERVER) to "Invalid", then enter the IP Address instead.
3. For convenience, you can use
Otherwise is used to enter an asterisk under other conditions.
or
2 4 0 3
STOP
to enter a period "." while programming IP Addresses only.
SET MODE (1-8)
∨ ∧
ENTER NO. OR
1:USER PARAMETERS?
PRESS SET TO SELECT
IP ADDRESS
❚
IP ADDRESS
123.178.240.3❚
SUBNET MASK
❚
or .